Measure your wrist with a tape measure, extend the measurements by about 2 inches and record the measurements.
Select a silicone sheet, ¼ inch wide of your preferred color from the array of colors available. Lay the silicone sheet on a flat stable surface. Place a ruler on the silicone sheet and cut it using a sharp knife to fit your wrists measurements. Cut the sheet as carefully as possible to avoid rugged edges.
Place letter stencils on the silicone sheet and spell out your strength message. Apply acrylic paint over the stencil and let it dry for 3 hours. Remove the stencil and leave the silicone sheet to dry for another 12 hours. Alternatively, write or draw your strength message or symbol on the silicone sheet with a permanent marker, let it dry for 2 minutes and repeat the drawing or writings. Repeat the process until you achieve your desired effect.
Apply super glue to one loose end of the bracelet. Ensure the glue does not come into contact with your fingers.
Curve the silicone sheet into a bracelet. Attach the glued end to the opposite end and hold them together for 3 minutes. Let the glue dry.