Prepare a solution of lactophenol cotton blue. Weigh out 0.05 grams of cotton blue dye using a sensitive weighing scale. Mix the dye with 20 milliliters of distilled water in a test tube and leave it overnight.
Put on gloves before finishing the stain preparation the next day. Place 20 ml of lactic acid into a beaker and mix it with 20 g of phenol crystals. Stir until the mixture is dissolved. Add in 40 ml of glycerol and mix. Then strain the cotton blue solution through a piece of filter paper into the beaker and mix thoroughly.
Alternatively, use a commercially prepared source of the stain. Store the stain at room temperature.
Label a microscope slide with the sample identification name or number. Use one sterile dropper to put a single drop of a water sample onto the center of the microscope slide. For a dry sample, place a single drop of 70 percent alcohol solution onto the slide, and then use a sterile loop to mix the dry sample into the alcohol.
Use a clean dropper to transfer two drops of the lactophenol cotton blue stain onto the center of the slide. If you are using 70 percent alcohol on the slide, do this before the alcohol evaporates off the slide.
Touch one edge of the microscope cover slip to one edge of the wet sample preparation. Let the slip fall gently onto the sample preparation, ensuring that you trap no air bubbles under the slide. The stained sample is now ready for examination under the microscope.