Pass natural gas into a heat exchanger to lower the temperature of the gas.
Move the heated gas into a low temperature separator. As the gas rapidly cools, water vapor will form into solid ice crystals and drop out of the natural gas.
Remove the dehydrated natural gas from the low temperature separator and continue on for further processing, if needed.
Move the natural gas into the bottom of a desiccant tower.
Pass the natural gas through adsorbents (silica gel, molecular sieve, activated alumina and activated carbon) until the desiccant tower reaches a maximum load.
Move the natural gas into another tower while the first tower regenerates using an indirect heated portion of the processed gas.
Move the regeneration gas into an air-cooled heat exchanger until the water crystallizes and drops from the gas.
Return the regeneration gas into the processed natural gas and move the processed gas back thorough the first tower. Continue the process until the moisture level of the natural gas is at acceptable levels (4 lb. to 7 lb. per million standard cubic feet).
Move the natural gas into the bottom of a contactor tower.
Pump tri-ethylene glycol (TEG) solution into the top of the tower allowing the TEG solution to flow downward across bubble trays.
Continue moving natural gas into the contactor tower. The gas will pass through bubble trays contacting the TEG solution which will remove the water vapor. Move the dehydrated gas from the top of the contactor tower and continue into further processing, if needed.
Collect the TEG at the bottom of the contactor tower and heat until the water in the TEG boils out. Return the regenerated TEG back through the top of the contactor tower.