Inflate the Bounce Round water slide, but do not turn on the water. Locate the tear or hole that you want to repair. Inspect the area for any debris, dirt or loose threads. Remove all loose threads and dirt by wiping the area gently with a clean cloth.
Clean the area around the hole with rubbing alcohol and a lint-free cleaning cloth. Clean an area about two inches all the way around the hole or tear. Wait for the alcohol to completely evaporate.
Peel about one inch of the backing from the adhesive patch. Anchor the patch strip about two inches above the tear in the bounce house. Slowly peel the backing away from the patch while simultaneously smoothing the patch over the hole.